An ISO 9002 Registered Company Serving Industry's Electrical Repair Needs
 

Land Area: 2.63 Acres

Building:    Constructed in 1999, 28,280 sq. ft.

                2-1/2 stories, 80 ft. wide x 297 ft. long

Cranes: 

    Main Overhead Crane System
    Runway 40’ x 250’ 10 ton, 5 ton, and 3 ton Bridge Cranes

    (4) Additional Overhead Cranes 3 ton, 3 ton, 1 ton, 
         and 1/2 ton Cranes

Balance: IRD 260LS-B200 20,000 Lb Capacity

             Schenck CAB 700 Hard Bearing 6,500 Lb Capacity

Vibration Analysis: IRD 885, CSI 2120

            Main Test Panel 1500 KVA @ 480 Volts

          High Voltage Power Supply 5,000 Volts - 1,500 KVA

          DC Dynamometer 20 HP

          Induction Dynamometer 600 HP

Ovens: (2) Bake Out Ovens 6’ x 5’ x 11’ and 7’ x 7’ x 8’

           (1) Burn-Out Oven (Bayco Mfg.) 6’ x 6’ x 7’

Welders: 

 Miller Mig, Tig, & Stick Welders 300, 250, 400 Amps

        Lincoln Rotating DC Welder 500 Amps

Machine

        (3) Engine Lathes Max. Capacity 26” x 116”

          (2) Milling Machines 19” x 72” Table & 12” x 48” Table

        (3) Drill Presses 11” Bed x 48” Travel

        (3) Hydraulic Presses 25-Ton, 100-Ton, 300-Ton

Vacuum Impregnation System: 72” Diameter x 102” Deep

Coil Winding System: 

          Samatic Computerized System Model 2222

Cleaning Systems: 

         Glass Bead Cleaning
         Spadone 4’ x 4’ x 4’ Capacity

         High Pressure Washing System
         Hotsey 5 Gallons / Minute @ 2,000 psi

         Grit Blaster (Corn Cob, Walnut Shell)
         Titan U700P (non abrasive) 700 lbs
         

Vehicles: 

        Kenworth T-300 with 20’ bed 52,000 lb.
        GVW, 32,400 lb Cargo

        (1) Flat Bed Pickup, 1-Ton

        (1) Pickup with Lift, 3/4 Ton

        (2) Clark Hi-Lo’s: 6,000 lb, 6,500 lb

        (1) Hyster Hi-Lo, 12,000 lb